Hallo!
Habe wegen einer undichten Manschette den linken, vorderen Radantrieb zerlegt, und die Ersatzteile lt. Ersatzteilliste bestellt.
Da taucht nun ein O-Ring (TEIL NR. 66) auf, der beim Zerlegen meines Antriebes nicht vorhanden war.
Gibt es verschiedene Radantriebsausführen? Wo wird der O-Ring moniert?
DANKE …
Christian
Radantrieb O-Ring
Moderatoren: eniac, Robi, Stef@n
Re: Radantrieb O-Ring
Der Ring kommt wie beim Pnzgauer unter den Laufring der Flanschwelle (32)
Grüße
derStefan
derStefan
Re: Radantrieb O-Ring
* * * D A N K E * * *
Christian
Christian
Re: Radantrieb O-Ring
To get the "O" ring out to replace, heat the metal ring (32) with a blow torch or a hot air gun. When it gets hot enough it will "POP" and come off, exposing the "O" ring.
Replace the "O" ring and tap the collar (32) back down to put the collar back in place to provide the sealing surface for the Oil seal.
John
Replace the "O" ring and tap the collar (32) back down to put the collar back in place to provide the sealing surface for the Oil seal.
John
Haflinger 703AP called Lurch