Give them to Constantine so he can publish them for all. http://tdc.haflinger-4wd.com/
John
Die Suche ergab 119 Treffer
- Mo Mai 06, 2024 21:10
- Forum: Haflinger Allgemein
- Thema: Typenprüfungs-Protokolle der Schweizer Armee
- Antworten: 1
- Zugriffe: 255
- Fr Jan 26, 2024 20:14
- Forum: Haflinger Technisches
- Thema: Optimierung Luftansaugverrohrung zum Luftfilter
- Antworten: 7
- Zugriffe: 3941
Re: Optimierung Luftansaugverrohrung zum Luftfilter
Reduce the amount of dust in the engine bay by making sure you have the rubber seal that goes around the bottom of the engine bay tin work to seal the gap between the tin work and the bodywork. Then clean the oil bath in the cyclone and also clean the paper air filter. If you have to do it every day...
- Sa Jan 20, 2024 9:49
- Forum: Haflinger Technisches
- Thema: Handgas Hafi CH 1.Serie
- Antworten: 9
- Zugriffe: 3332
Re: Handgas Hafi CH 1.Serie
You can take the plastic handle off the hand throttle cable in the cab. Then make a collar with a hole in the middle that fits the hand throttle. In the side of the collar you make a hole with a thread in it that goes to the hole in the center of the collar. A bolt with a wing shape on the top (so y...
- Do Nov 30, 2023 19:43
- Forum: Haflinger Technisches
- Thema: Ladekontrollleuchte geht nicht aus!
- Antworten: 67
- Zugriffe: 9203
Re: Ladekontrollleuchte geht nicht aus!
Well done for solving the problem! I have had my electronic regulator fitted for the last 5 years or so. If it has been well made, it should not give trouble. Far more likely that you have ignition problems with points / coil / capacitor / timing etc.
John
John
- Mi Nov 22, 2023 8:38
- Forum: Haflinger Technisches
- Thema: Ladekontrollleuchte geht nicht aus!
- Antworten: 67
- Zugriffe: 9203
Re: Ladekontrollleuchte geht nicht aus!
Morning, The "flying fuse" is to protect the main wiring of the Haflinger, not the voltage regulator. The 20Amp fuse is good for that. If the Dynastart is built as original then there is no need to have any further protection for the voltage regulator as the voltage put out by the dynastar...
- Do Nov 02, 2023 21:32
- Forum: Haflinger Technisches
- Thema: Ladekontrollleuchte geht nicht aus!
- Antworten: 67
- Zugriffe: 9203
Re: Ladekontrollleuchte geht nicht aus!
The expert advises 16Amp controller. It will not stress the Dynastart as much which will make it last longer. Do you actually use a trailer on every trip? Do you actually use the Auxillary heater for 6 hours at a time without the engine running? Do you actually use the heater continuously for 6 hour...
- Mi Nov 01, 2023 8:29
- Forum: Haflinger Technisches
- Thema: Ladekontrollleuchte geht nicht aus!
- Antworten: 67
- Zugriffe: 9203
Re: Ladekontrollleuchte geht nicht aus!
Use the 16Amp one. The Haflinger Dynastart is not really rated to produce 20Amp continuously. Also, the amount of power it can produce reduces as it gets hot which, it will do being on top of hte engine and alos it's self generated heat. Change some of the bulbs for LED one will help as well unless ...
- Mo Sep 11, 2023 7:31
- Forum: Haflinger Technisches
- Thema: Bremsflüssigkeit leer, kein Pedaldruck, kein Leck
- Antworten: 10
- Zugriffe: 1630
Re: Bremsflüssigkeit leer, kein Pedaldruck, kein Leck
If you have no brake pedal pressure then most likely the piston in the master cylinder is stuck at the bottom of the cylinder. You will have to take the master cylinder out and check. Fluid leak will be from somewhere you have not looked at yet. When you bleed the system, how are you doing it? Based...
- Sa Sep 09, 2023 19:53
- Forum: Haflinger Technisches
- Thema: Bremsflüssigkeit leer, kein Pedaldruck, kein Leck
- Antworten: 10
- Zugriffe: 1630
Re: Bremsflüssigkeit leer, kein Pedaldruck, kein Leck
If the fluid is no longer in the reservoir, then it must have gone somewhere. Brake fluid goes from the reservoir to the master cylinder. It could be leaking from the bottom of the reservoir. Or it could be leaking from the pipe that goes to the master cylinder. The next place it could be leaking fr...
- Di Sep 05, 2023 21:48
- Forum: Haflinger Technisches
- Thema: Ladekontrollleuchte geht nicht aus!
- Antworten: 67
- Zugriffe: 9203
Re: Ladekontrollleuchte geht nicht aus!
Yes, You can install it. Make sure you have the correct 25 Amp fuse in the circuit right near the regulator box (Controll box). Check the Charging bulb is good - if it does not work replace it. Start the engine and observe the charging light closely - If it goes out the moment the engine Revs go up ...
- Mo Sep 04, 2023 18:32
- Forum: Haflinger Technisches
- Thema: Ladekontrollleuchte geht nicht aus!
- Antworten: 67
- Zugriffe: 9203
Re: Ladekontrollleuchte geht nicht aus!
Dynastart can be exchanged here:-
https://prokschi.at/haflinger/electrica ... -part.html
or rebuilt by this company:
www.dynamoregulatorconversions.com
Electronic Regulator can be obtained here:- www.dynamoregulatorconversions.com
John
https://prokschi.at/haflinger/electrica ... -part.html
or rebuilt by this company:
www.dynamoregulatorconversions.com
Electronic Regulator can be obtained here:- www.dynamoregulatorconversions.com
John
- So Sep 03, 2023 7:29
- Forum: Haflinger Technisches
- Thema: Ladekontrollleuchte geht nicht aus!
- Antworten: 67
- Zugriffe: 9203
Re: Ladekontrollleuchte geht nicht aus!
Look on this page to see a reconditioned Regulator or to send your one for repair.
https://www.autoquariat.at/shop/hafling ... chten/?p=3
John
https://www.autoquariat.at/shop/hafling ... chten/?p=3
John
- Fr Sep 01, 2023 22:59
- Forum: Haflinger Technisches
- Thema: Ladekontrollleuchte geht nicht aus!
- Antworten: 67
- Zugriffe: 9203
Re: Ladekontrollleuchte geht nicht aus!
If when you take the regulator box apart you see any sort of heat damage, smell of burning - buy a new one! There is very little you can do to repair a regulator unless you are willing and capable of re-winding the coils with new insulated copper wire. It is also possible that you have burnt the wir...
- Mi Aug 30, 2023 20:49
- Forum: Haflinger Technisches
- Thema: Gänge gehen nicht mehr rein
- Antworten: 15
- Zugriffe: 2151
Re: Gänge gehen nicht mehr rein
Start a new thread for this - Any answers we give will get lost in the thread which will make it difficult for some one who is looking for answers to a charging light problem.
John
John
- Sa Aug 26, 2023 21:41
- Forum: Haflinger Technisches
- Thema: Gänge gehen nicht mehr rein
- Antworten: 15
- Zugriffe: 2151
Re: Gänge gehen nicht mehr rein
Glad you have found the issue. Make 100% sure the release bering is good or you will be taking the engine out again very soon. I did think you would find the issue insidethe clutch bell housing as there is very little to go wrong outside which you can not see, like a broken cluth cable or a broken /...
- Mi Aug 23, 2023 22:03
- Forum: Haflinger Technisches
- Thema: Gänge gehen nicht mehr rein
- Antworten: 15
- Zugriffe: 2151
Re: Gänge gehen nicht mehr rein
Do you have any movement on the clutch pedal? Most likely something has broken in the clutch bell housing. Probably the release bearing arm or pins. Sounds like you are going to have to take the engine out. Not such a big job on a Haflinger. Easy with two people, and a hydralic jack on wheels. Remov...
- So Jul 23, 2023 20:17
- Forum: Haflinger Technisches
- Thema: Rattern Kupplung
- Antworten: 1
- Zugriffe: 1409
Re: Rattern Kupplung
It will either be the clutch release bearing (Throw out bearing) or one of the little springs has broken. Either way you will have ro remove hte engine so you can get to the clutch in the bell housing.
Do it NOW!!! The longer you leave it with driving the more damage it will do.
John
Do it NOW!!! The longer you leave it with driving the more damage it will do.
John
- So Jul 23, 2023 8:24
- Forum: Haflinger Technisches
- Thema: Haflinger Serie 2 Tank aufarbeiten
- Antworten: 3
- Zugriffe: 1306
Re: Haflinger Serie 2 Tank aufarbeiten
Hi Stefan, Unless you want to cut open the tack, you will have to use a chemical to clean the inside of the tank. You could try very small "pea shingle" stones and the cement mixer, but you runthe risk of the small stones going up the petrol feed pipe and getting stuck in there. Chemical c...
- Mo Mai 08, 2023 8:46
- Forum: Biete Haflinger
- Thema: Verkaufe Haflinger 700AP
- Antworten: 2
- Zugriffe: 3822
Re: Verkaufe Haflinger 700AP
This shoud be saved!
John
John
- Mi Jan 18, 2023 8:25
- Forum: Haflinger Technisches
- Thema: Problem in Linkskurven
- Antworten: 12
- Zugriffe: 3857
Re: Problem in Linkskurven
First thing I would do is take the Carb right off the vehicle and strip and clean it. Even better if you can clean it in an Ultrasonic cleaner. Put it back on and try driving again. Next would be to check the fuel tank pick up pipe - maybe there is someting in the bottom of the tank that rolls into ...