TD K Rear Door Shut Dimension
-
- Beiträge: 261
- Registriert: Mi Apr 09, 2008 12:26
- Wohnort: Melbourne, AUSTRALIA
- Kontaktdaten:
TD K Rear Door Shut Dimension
Can someone give me the dimension (X) of the upper rear door shut height as per in the sketch below....Thanks!
Peter
www.ozpinz.com
www.ozpinz.com
Re: TD K Rear Door Shut Dimension
No I can't...
But your drafts are amazing!
But your drafts are amazing!
Re: TD K Rear Door Shut Dimension
Hello Peter,
ich can check this in the next days.
Regards Udo
ich can check this in the next days.
Regards Udo
-
- Beiträge: 261
- Registriert: Mi Apr 09, 2008 12:26
- Wohnort: Melbourne, AUSTRALIA
- Kontaktdaten:
Re: TD K Rear Door Shut Dimension
Thanks Udo and thanks Pinzi, that's a start, but if I could get an exact dimension that would be great!
As I'm converting a 718M to a K and as many of the panels are unavailable, including the door top, I'm having to fabricate parts myself; however I want it as close to factory specifications (in regards to size etc) as possible.
I'II post some pics soon.
As I'm converting a 718M to a K and as many of the panels are unavailable, including the door top, I'm having to fabricate parts myself; however I want it as close to factory specifications (in regards to size etc) as possible.
I'II post some pics soon.
Peter
www.ozpinz.com
www.ozpinz.com
Re: TD K Rear Door Shut Dimension
Hi Peter
Didn't you get all the body details from me?
If not I will send the rest also.
Regards Xaver
Didn't you get all the body details from me?
If not I will send the rest also.
Regards Xaver
-
- Beiträge: 261
- Registriert: Mi Apr 09, 2008 12:26
- Wohnort: Melbourne, AUSTRALIA
- Kontaktdaten:
Re: TD K Rear Door Shut Dimension
G'Day Xaver, Happy New Year!
Yes I did get details from you and I use them religiously almost every day I work on the Pinzgauer.....I had two sets of them printed as A0 drawings and they are constantly in use (albeit a bit tatty now....I need to get some more A0 prints done ) but unfortunately that one dimension I want for the rear door shut area is not shown and I can't calculate it from other dimensions that are shown, which is often the case with technical drawings, hence the post.
Yes I did get details from you and I use them religiously almost every day I work on the Pinzgauer.....I had two sets of them printed as A0 drawings and they are constantly in use (albeit a bit tatty now....I need to get some more A0 prints done ) but unfortunately that one dimension I want for the rear door shut area is not shown and I can't calculate it from other dimensions that are shown, which is often the case with technical drawings, hence the post.
Peter
www.ozpinz.com
www.ozpinz.com
Re: TD K Rear Door Shut Dimension
http://www.puch.at/1241_Hecktuer-A%2c-B ... spx?LNG=de
Pos 1
The complete door should be available.
€ 1300.-
You also could use the sealing from Pos 2 as a size.
€ 200.-
Pos 1
The complete door should be available.
€ 1300.-
You also could use the sealing from Pos 2 as a size.
€ 200.-
Re: TD K Rear Door Shut Dimension
G'Day Peter
I thought I forgot to send the details of the hardtop,
thus my post.
Did you ever ask s-Tec directly for drawings and technical documents?
I thought I forgot to send the details of the hardtop,
thus my post.
Did you ever ask s-Tec directly for drawings and technical documents?
-
- Beiträge: 14
- Registriert: So Dez 10, 2006 22:13
- Wohnort: italy
Re: TD K Rear Door Shut Dimension
Actually the door on K is not exactly as in the sketch, as upper and lower parts are in one piece with only a small groove in between. I can measure the whole door and distance groove to top if you still need it.
-
- Beiträge: 261
- Registriert: Mi Apr 09, 2008 12:26
- Wohnort: Melbourne, AUSTRALIA
- Kontaktdaten:
Re: TD K Rear Door Shut Dimension
If you could, it would be appreciated!
I'm guessing however that even though the TD rear door is a single piece, it is constructed using two pieces (a lower and upper section) given that the lower piece can be purchased separately.
Interestingly I see on some of the UK TD's that the top and bottom sections are split and can be opened independently.
If you could also grab a measurement from the join "groove" it would be helpful.
Thanks!
I'm guessing however that even though the TD rear door is a single piece, it is constructed using two pieces (a lower and upper section) given that the lower piece can be purchased separately.
Interestingly I see on some of the UK TD's that the top and bottom sections are split and can be opened independently.
If you could also grab a measurement from the join "groove" it would be helpful.
Thanks!
Peter
www.ozpinz.com
www.ozpinz.com